How difficult is it to make a tag cloud? Not very difficult at all. Let’s see!

Let’s start with the markup

For our HTML, we’re going to put each of our tags into a list, <ul class="tags"><ul>. We’ll be injecting into that with JavaScript.

If your tag cloud is already in HTML, and you are just looking to do the relative font-size thing, that’s good! Progressive enhancement! You should be able to adapt the JavaScript later on so it does just that part, but not necessarily building and injecting the tags themselves.

I have mocked out some JSON with a certain amount of articles tagged with each property. Let’s write some JavaScript to go grab that JSON feed and do three things.

First, we’ll create an <li> from each entry for our list. Imagine the HTML, so far, is like this:

<ul class="tags">
  <li>align-content</li>
  <li>align-items</li>
  <li>align-self</li>
  <li>animation</li>
  <li>...</li>
  <li>z-index</li>
</ul>

Second, we’ll put the number of articles each property has in parentheses beside inside each list item. So now, the markup is like this:

<ul class="tags">
  <li>align-content (2)</li>
  <li>align-items (2)</li>
  <li>align-self (2)</li>
  <li>animation (9)</li>
  <li>...</li>
  <li>z-index (4)</li>
</ul>

Third, and last, we’ll create a link around each tag that goes to the correct place. This is where we can set the font-size property for each item depending on how many articles that property is tagged with, so animation that has 13 articles will be much bigger than background-color which only has one article.

<li class="tag">
  <a
    class="tag__link"
    href="https://example.com/tags/animation"
    style="font-size: 5em">
    animation (9)
  </a>
</li>

The JavasScript part

Let’s have a look at the JavaScript to do this.

const dataURL =
  "https://gist.githubusercontent.com/markconroy/536228ed416a551de8852b74615e55dd/raw/9b96c9049b10e7e18ee922b4caf9167acb4efdd6/tags.json";
const tags = document.querySelector(".tags");
const fragment = document.createDocumentFragment();
const maxFontSizeForTag = 6;

fetch(dataURL)
  .then(function (res) {
    return res.json();
  })
  .then(function (data) {
    // 1. Create a new array from data
    let orderedData = data.map((x) => x);
    // 2. Order it by number of articles each tag has
    orderedData.sort(function(a, b) {
      return a.tagged_articles.length - b.tagged_articles.length;
    });
    orderedData = orderedData.reverse();
    // 3. Get a value for the tag with the most articles
    const highestValue = orderedData[0].tagged_articles.length;
    // 4. Create a list item for each result from data.
    data.forEach((result) => handleResult(result, highestValue));
    // 5. Append the full list of tags to the tags element
    tags.appendChild(tag);
  });

The JavaScript above uses the Fetch API to fetch the URL where tags.json is hosted. Once it gets this data, it returns it as JSON. Here we seque into a new array called orderedData (so we don’t mutate the original array), find the tag with the most articles. We’ll use this value later on in a font-scale so all other tags will have a font-size relative to it. Then, forEach result in the response, we call a function I have named handleResult() and pass the result and the highestValue to this function as a parameter. It also creates:

• a variable called tags which is what we will use to inject each list item that we create from the results,
• a variable for a fragment to hold the result of each iteration of the loop, which we will later append to the tags, and
• a variable for the max font size, which we’ll use in our font scale later.

Next up, the handleResult(result) function:

function handleResult(result, highestValue) {
  const tag = document.createElement("li");
  tag.classList.add("tag");
  tag.innerHTML = `<a class="tag__link" href="${result.href}" style="font-size: ${result.tagged_articles.length * 1.25}em">${result.title} (${result.tagged_articles.length})</a>`;

  // Append each tag to the fragment
  fragment.appendChild(tag);
}

This is pretty simple function that creates a list element set to the variable named tag and then adds a .tag class to this list element. Once that’s created, it sets the innerHTML of the list item to be a link and populates the values of that link with values from the JSON feed, such as a result.href for the link to the tag. When each li is created, it’s then added as a string to the fragment, which we will later then append to the tags variable. The most important item here is the inline style tag that uses the number of articles—result.tagged_articles.length—to set a relative font size using em units for this list item. Later, we’ll change that value to a formula to use a basic font scale.

I find this JavaScript just a little bit ugly and hard on the eyes, so let’s create some variables and a simple font scale formula for each of our properties to tidy it up and make it easier to read.

function handleResult(result, highestValue) {
  // Set our variables
  const name = result.title;
  const link = result.href;
  const numberOfArticles = result.tagged_articles.length;
  let fontSize = numberOfArticles / highestValue * maxFontSizeForTag;
  fontSize = +fontSize.toFixed(2);
  const fontSizeProperty = `${fontSize}em`;

  // Create a list element for each tag and inline the font size
  const tag = document.createElement("li");
  tag.classList.add("tag");
  tag.innerHTML = `<a class="tag__link" href="${link}" style="font-size: ${fontSizeProperty}">${name} (${numberOfArticles})</a>`;
  
  // Append each tag to the fragment
  fragment.appendChild(tag);
}

By setting some variables before we get into creating our HTML, the code is a lot easier to read. And it also makes our code a little bit more DRY, as we can use the numberOfArticles variable in more than one place.

Once each of the tags has been returned in this .forEach loop, they are collected together in the fragment. After that, we use appendChild() to add them to the tags element. This means the DOM is manipulated only once, instead of being manipulated each time the loop runs, which is a nice performance boost if we happen to have a large number of tags.

Font scaling

What we have now will work fine for us, and we could start writing our CSS. However, our formula for the fontSize variable means that the tag with the most articles (which is “flex” with 25) will be 6em (25 / 25 * 6 = 6), but the tags with only one article are going to be 1/25th the size of that (1 / 25 * 6 = 0.24), making the content unreadable. If we had a tag with 100 articles, the smaller tags would fare even worse (1 / 100 * 6 = 0.06).

To get around this, I have added a simple if statement that if the fontSize that is returned is less than 1, set the fontSize to 1. If not, keep it at its current size. Now, all the tags will be within a font scale of 1em to 6em, rounded off to two decimal places. To increase the size of the largest tag, just change the value of maxFontSizeForTag. You can decide what works best for you based on the amount of content you are dealing with.

function handleResult(result, highestValue) {
  // Set our variables
  const numberOfArticles = result.tagged_articles.length;
  const name = result.title;
  const link = result.href;
  let fontSize = numberOfArticles / highestValue * maxFontSizeForTag;
  fontSize = +fontSize.toFixed(2);
  
  // Make sure our font size will be at least 1em
  if (fontSize <= 1) {
    fontSize = 1;
  } else {
    fontSize = fontSize;
  }
  const fontSizeProperty = `${fontSize}em`;
  
  // Then, create a list element for each tag and inline the font size.
  tag = document.createElement("li");
  tag.classList.add("tag");
  tag.innerHTML = `<a class="tag__link" href="${link}" style="font-size: ${fontSizeProperty}">${name} (${numberOfArticles})</a>`;

  // Append each tag to the fragment
  fragment.appendChild(tag);
}

Now the CSS!

We’re using flexbox for our layout since each of the tags can be of varying width. We then center-align them with justify-content: center, and remove the list bullets.

.tags {
  display: flex;
  flex-wrap: wrap;
  justify-content: center;
  max-width: 960px;
  margin: auto;
  padding: 2rem 0 1rem;
  list-style: none;
  border: 2px solid white;
  border-radius: 5px;
}

We’ll also use flexbox for the individual tags. This allows us to vertically align them with align-items: center since they will have varying heights based on their font sizes.

.tag {
  display: flex;
  align-items: center;
  margin: 0.25rem 1rem;
}

Each link in the tag cloud has a small bit of padding, just to allow it to be clickable slightly outside of its strict dimensions.

.tag__link {
  padding: 5px 5px 0;
  transition: 0.3s;
  text-decoration: none;
}

I find this is handy on small screens especially for people who might find it harder to tap on links. The initial text-decoration is removed as I think we can assume each item of text in the tag cloud is a link and so a special decoration is not needed for them.

I’ll just drop in some colors to style things up a bit more:

.tag:nth-of-type(4n+1) .tag__link {
  color: #ffd560;
}
.tag:nth-of-type(4n+2) .tag__link {
  color: #ee4266;
}
.tag:nth-of-type(4n+3) .tag__link {
  color: #9e88f7;
}
.tag:nth-of-type(4n+4) .tag__link {
  color: #54d0ff;
}

The color scheme for this was stolen directly from Chris’ blogroll, where every fourth tag starting at tag one is yellow, every fourth tag starting at tag two is red, every fourth tag starting at tag three is purple. and every fourth tag starting at tag four is blue.

We then set the focus and hover states for each link:

.tag:nth-of-type(4n+1) .tag__link:focus,
.tag:nth-of-type(4n+1) .tag__link:hover {
  box-shadow: inset 0 -1.3em 0 0 #ffd560;
}
.tag:nth-of-type(4n+2) .tag__link:focus,
.tag:nth-of-type(4n+2) .tag__link:hover {
  box-shadow: inset 0 -1.3em 0 0 #ee4266;
}
.tag:nth-of-type(4n+3) .tag__link:focus,
.tag:nth-of-type(4n+3) .tag__link:hover {
  box-shadow: inset 0 -1.3em 0 0 #9e88f7;
}
.tag:nth-of-type(4n+4) .tag__link:focus,
.tag:nth-of-type(4n+4) .tag__link:hover {
  box-shadow: inset 0 -1.3em 0 0 #54d0ff;
}

I could probably have created a custom variable for the colors at this stage—like --yellow: #ffd560, etc.—but decided to go with the longhand approach for IE 11 support. I love the box-shadow hover effect. It’s a very small amount of code to achieve something much more visually-appealing than a standard underline or bottom-border. Using em units here means we have decent control over how large the shadow would be in relation to the text it needed to cover.

OK, let’s top this off by setting every tag link to be black on hover:

.tag:nth-of-type(4n+1) .tag__link:focus,
.tag:nth-of-type(4n+1) .tag__link:hover,
.tag:nth-of-type(4n+2) .tag__link:focus,
.tag:nth-of-type(4n+2) .tag__link:hover,
.tag:nth-of-type(4n+3) .tag__link:focus,
.tag:nth-of-type(4n+3) .tag__link:hover,
.tag:nth-of-type(4n+4) .tag__link:focus,
.tag:nth-of-type(4n+4) .tag__link:hover {
  color: black;
}

And we’re done! Here’s the final result:

Create a Tag Cloud with some Simple CSS and even Simpler JavaScript originally published on CSS-Tricks, which is part of the DigitalOcean family. You should get the newsletter.